20bhp gas steam boiler

Gas steam thermal cracking reaction furnace gas steam oven should be carefully introduced reflect in the use, to guard against water, acid, alkali and leakage into the low boilers using the system, the system should be installed filters installed to prevent debris into various types, to ensure the purity of the oil . Gas and steam is easily oxidized during heating, the acid value of the oil is increased at high temperatures and a large change rate. Steam oven gas kinematic viscosity gradually increases, which is due to the thermal cracking gas vapor component at high temperature, thermal polycondensation reaction. Thermal cracking reaction resulting in generation of small molecule compounds, to reduce its viscosity; oxidation temperature when the inner conduit thermally cleavage occurs at 300 ~ 400 ℃, coke formation in the pipe, the inner wall of the device, leading to heat accumulation pipe affect the heat transfer efficiency, sludge poor flowability, transfer oil accelerated aging failure, but also to the furnace, pipes local overheating, impairing the mechanical strength of the threat to personal safety.

Shandong Mining Group in the six months after the boiler use, users submit a report to our company, our company started in 2017 using WDR0.5-0.8-Ⅱ electric fast Boiler Co., Ltd. of heating 20bhp steam boiler. Large output, stable and reliable, high degree of automation, simple operation, do especially in terms of security is in place. After-sales service is very timely response to our technical consulting reply quickly and accurately. Whether it is party party products or fast fast service. My company is very satisfied. --customer feedback

(9)Combustion Adjustment method of Oil-fired Gas-fired Boiler

The combustion adjustment of oil-fired gas-fired boiler is successful and the load adjustment can be carried out after turning into normal operation. At this time, the combustion situation in the furnace should be observed frequently. If the atomization of oil and gas is not good, the flame jumps, the flame hits the furnace tank, and the exhaust temperature is too high or too low, the oil pressure, oil temperature, steam volume, air pressure and steam pressure should be adjusted in time to ensure the safe and economical operation of the boiler. The oil pressure and the pressure are related to the boiler load. The adjustment of the oil pressure is realized by adjusting the pressure of the burner or the amount of oil returned. The adjustment of air pressure is achieved through the opening of the valve. When adjusting a load, enter At the same time, the air volume adjustment must be carried out synchronously to ensure the reasonable match between the oil quantity and the air volume, so as to achieve the purpose of economical operation of the boiler.

Gas 20bhp steam boiler load changes in the water level of air pressure adjustment What happens next: load fluctuation gas steam boiler water level of the air pressure regulating what impact the boiler load refers to the amount of steam is supplied outside?. When the variation amount of steam needed outside world, boiler pressure, temperature, level crossing will move. When the load increases, the pressure drop in the water level is low, the air supply should be increased and the amount of coal. While enhanced combustion, and gradually increase the amount of water to maintain normal air pressure and water level. When reducing the load, the air pressure is high the water level rises, the amount of coal should be reduced and the air volume, reduce combustion, then the appropriate amount of water to reduce or suspend the water supply, the air pressure and water level in the stable nominal range, then press normally combustion and to adjust the amount of water. When reducing the load, the pressure rise when the water level is low, to increase the amount of water should be, until the water level returns to normal, then the need for air pressure changes and the load situation, and to adjust the combustion water.