hot water boiler 0 2 MW

Combustion gas boiler firing was successful adjustment, the load can be adjusted into normal operation, this time, should always observe the combustion furnace, in time for the amount of steam, air flow, steam pressure to be adjusted to ensure safe and economic operation of the boiler.

Notes runs under pressure in the boiler which is one of supercharged boiler boiler equipment common in our country. On the installation and use, only strict compliance with the relevant provisions of the installation, the installation to better. Correct use of sub-pressure boiler can avoid a series of unnecessary harm them, to ensure the safe operation of the boiler and physical safety of personnel, it is necessary for the operation pressure boiler precautions have detailed knowledge of. First, note that an important way to the safe operation of the boiler water pressure Feed Mode. Therefore, before starting the injection of water, the return pipe must be closed inlet valve and open the circulation pump, the pressure is adjusted to an appropriate range. After completion of water systems, boiler water level when adjusted to the normal state, we can maximize the performance of the boiler pressurized wells. Second, note that check before ignition before ignition supercharged boiler must be checked for each auxiliary boilers, with particular attention to the reliability of the valve opening, to ensure the smooth circulation of the water in the boiler, the steam pressure to avoid excessive clogging . The examination found that serious leakage closing valve, timely repair or replace the ignition can not be recklessly. Third, pay attention to cleaning up debris in the water tank pressurized boiler heated water is clean, but long-term use may precipitate some of the debris and water tanks, debris deposited more likely to damage the pump and plug valves. Before using specialized pressurized boiler, we must check whether there are any signs of the tank, in order to promptly clean up, to ensure that the heating is better to avoid overheating in the boiler and the air pressure is too high risk.

Steam boiler for power generation

multi-fuel Steam boiler for power electricity in farm

In a number of bidders, the party quickly ready gas water tube boiler with its unique advantages of low nitrogen come out on top; the low nitrogen gas water tube boiler has the following advantages. 1, boiler factory ready, body welding, manufacturing completed in the factory, quality is the best guarantee to ensure the long-term safe and reliable operation of the boiler. 2, a small work site installation, short cycle, the boiler body all-membrane wall structure, effectively reduce heat loss boilers, to improve the thermal efficiency of the boiler. 3, boiler furnace, convection and rational use of two-pass arrangement flue gas velocity, effective control of the flue gas resistance, no fan, lower operating power consumption, energy saving. 4, micro-pressure combustion, the boiler to prevent the air leakage phenomenon, to effectively control exhaust excess air coefficient, reducing heat losses, improved boiler efficiency. 5, with forced water circulation system, the flow rate of each process are selected in accordance with the recommended standard upper limit value, to ensure that the cold boiled heating surface does not occur too, causing water hammer or squib; preventing sedimentation oxygen corrosion and impurities in the water, to avoid heat boiler accident damaged surface;? burner flame, gas overpressure or low pressure, 15 kinds of safety warning and fault protection device leakage protection, gas, comprehensive guarantee safe operation of boilers;? intelligent integration operation control system, with touch-screen operation Dual purely manual control buttons and functions.